Archives: My Products

ARC S7 Polymer Composite

High Temperature and Chemical Resistant Novolac Vinyl Ester Coating ​​​​​​​​​​​​ A low VOC, novolac vinyl ester based, sprayable protective barrier coating for high temperature, chemical exposures where thermal cycling conditions may be present. ARC S7 industrial coating is designed to: ​Resist thermal cycling conditions up to 180°C (350°F) Resist a wide range of inorganic as well as organic …

ARC S7 Polymer Composite Read More »

ARC S7 AR Polymer Composite

High Temperature, Chemical and Erosion Resistant Novolac Vinyl Ester Coating ​​​​​​​​​ARC S7 AR is a novolac vinyl ester based, ceramic reinforced, protective coating for high temperature, chemical exposures where erosive particulates and thermal cycling conditions may be present. ARC S7 AR industrial coating is designed to: Resists erosion ​Resists thermal cycling conditions up to 180°C (350°F) Resists a wide …

ARC S7 AR Polymer Composite Read More »

ARC S5 Polymer Composite

Corrosion Protection in High-Temperature Immersion ​​​​​​​​​Sprayable coating for high-temperature immersion up to 180˚C (356˚F). Ideal for elevated temperature process vessels, and equipment exposed to heated fluids where high-temperature differentials may exist. P​rotects and upgrades new and old metal equipment. Performs in immersed aqueous solution conditions up to 180°C (356°F) Replaces exotic alloys, engineered plastics, ceramics and …

ARC S5 Polymer Composite Read More »

ARC HT-S Polymer Composite

High Temperature Corrosion Resistant Coating ​​​​​A 100% solids glass/ceramic reinforced novolac epoxy lining for high temperature aqueous cold wall corrosion conditions.  ​ARC HT-S industrial coating/lining is designed to: Protect and upgrade new and old metal equipment Perform in immersed aqueous solution conditions up to 150°C (302°F) Replace exotic alloys, engineered plastics, ceramics, and conventional coatings …

ARC HT-S Polymer Composite Read More »

ARC SD4i

Sprayable, Ceramic-Reinforced Coating ​​​​​​​​100% solids, advanced reinforced thin film coating to protect structures and equipment in extreme immersion services. ARC SD4i industrial coating is designed to: ​Protect against corrosion and erosion Provide extended protection in aggressive chemical immersion services Apply by brush, roller, airless or plural component spraying

ARC S2

Brush-Roll-Spray Grade, Ceramic-Reinforced Erosion Resistant Coating ​​​​​​​100% solids, ceramic reinforced thin film coating to protect structures against erosion, abrasion, and corrosion. ARC S2 industrial coating is designed to: Protect against corrosion and erosion Provide improved material flow properties Easily apply by brush, roller, airless, or heated plural component airless spraying

ARC S1HB

High Build, Single Coat, Edge-Retentive Barrier Coating ​​​​​​​​A 100% solids, mineral-reinforced, high-build coating to protect structures against chemical corrosion and erosion.  ARC S1HB is designed to: Provide excellent barrier protection against corrosion and chemical attack Provide resistance to erosive flow High build (1 – 2 ​mm/ 40 – 80 mils) coating designed for rough surfaces Easily …

ARC S1HB Read More »

ARC CS2

General Purpose Thin-Film Epoxy Coating ​​​​​​100% solids, mineral reinforced, wear resistant, low viscosity epoxy. ARC CS2 thin film industrial coating is designed to: Protect new and old concrete subject to mild chemical and/or physical damage Replace tiles, outlast paints and other concrete coatings  Apply by roller, brush, squeegee, or airless/heated plural component spray

ARC BX5 Polymer Composite

Ultra-Fast Curing Coating for Fine-Particle Moderate Sliding Wear ​​​​ARC BX5’s unique surface-tolerant, rapid-curing chemistry allows you to apply the product to marginally prepared surfaces and then return equipment back to service in as little as one hour (at room temperature). Once cured, the high loading of ceramic particles in the film resists aggressive abrasion conditions under wet …

ARC BX5 Polymer Composite Read More »

ARC 10 Polymer Composite

Machinable Polymer Alloy Coating for Repairing Surfaces Machined to Close Tolerances ​​​​​​​A machinable polymer alloy blend used to resurface scored and pitted regions that may be machined at a later stage to tight tolerances. ​​ ARC 10 industrial coating is designed to: Resurface worn metal parts which require machining to tolerances afterwards Resurface corroded and pitted …

ARC 10 Polymer Composite Read More »