ARC S7AR POLYMER COMPOSITE

High Temperature, Chemical and Erosion Resistant Novolac Vinyl Ester Coating

ARC S7 AR is a novolac vinyl ester based, ceramic reinforced, protective coating for high temperature, chemical exposures where erosive particulates and thermal cycling conditions may be present. ARC S7 AR industrial coating is designed to:

Resists erosion
Resists thermal cycling conditions up to 180°C (350°F)
Resists a wide range of inorganic as well as organic acids and hydrocarbon based chemical compounds
Easily applied by airless spray system

Chemical resistant polymer matrix
- Resists a broad spectrum of organic and inorganic acid
- Resistant to cold wall delamination
Incorporates fine-graded sizes of ceramic reinforcements
- Abrasion resistant
Toughened resin structure
- Resists cracking and disbondment under thermal cycling conditions
- Survives rapid decompression
Low mixed viscosity
- Easy to apply by conventional airless spray
High dielectric resistivity
- Allows user to inspect with high voltage spark testing per NACE SP0188
Cured films have low surface energy
- Reduces particle attachment

375 μm (15 mil) WFT yields 300 μm (12 mil) DFT

14 liter kit covers 36.75 m2 (395.57 ft2)
For gaseous and condensing gas applications ARC S7 AR is recommended to be applied as a 2-coat system at 375 – 500 μm (15 – 20 mil) wft1 per coat. The recommended total dft2 is 650 -850 μm (25 – 30 mil)
For immersion applications it is recommended to use ARC S7 as a base coat, followed by ARC S7 AR as a top coat

Note: Components are pre-measured and pre-weighed.

Each kit includes mixing and application instructions.

1 wft = wet film thickness

2 dft = dry film thickness

Maintain transport temperature below 24°C (75°F)

Available Colors

Light Gray, Dark Gray

Chemical resistant polymer matrix
- Resists a broad spectrum of organic and inorganic acid
- Resistant to cold wall delamination
Incorporates fine-graded sizes of ceramic reinforcements
- Abrasion resistant
Toughened resin structure
- Resists cracking and disbondment under thermal cycling conditions
- Survives rapid decompression
Low mixed viscosity
- Easy to apply by conventional airless spray
High dielectric resistivity
- Allows user to inspect with high voltage spark testing per NACE SP0188
Cured films have low surface energy
- Reduces particle attachment

375 μm (15 mil) WFT yields 300 μm (12 mil) DFT

14 liter kit covers 36.75 m2 (395.57 ft2)
For gaseous and condensing gas applications ARC S7 AR is recommended to be applied as a 2-coat system at 375 – 500 μm (15 – 20 mil) wft1 per coat. The recommended total dft2 is 650 -850 μm (25 – 30 mil)
For immersion applications it is recommended to use ARC S7 as a base coat, followed by ARC S7 AR as a top coat

Note: Components are pre-measured and pre-weighed.

Each kit includes mixing and application instructions.

1 wft = wet film thickness

2 dft = dry film thickness

Maintain transport temperature below 24°C (75°F)

Available Colors

Light Gray, Dark Gray

PT. PANCAMAS PUTRAMANDIRI

INDUSTRIES

Petrochemical - Refining

PULP AND PAPER

MINING

POWER PLANT

F&B AND PHARMACEUTICAL

OIL & GAS

Products

ARC Industrial Coating

INDUSTRIAL LUBRICANT / MRO

375 μm (15 mil) WFT yields 300 μm (12 mil) DFT

Available Colors

375 μm (15 mil) WFT yields 300 μm (12 mil) DFT

Available Colors

Need more information?

About

Contact

Submission Form to Request Catalog For Product: