ARC T7 AR POLYMER COMPOSITE

Abrasion Resistant Barrier Coating for High Temperature and Chemical Exposures

A ceramic reinforced novolac vinyl ester, protective coating for high temperature, chemical exposures where aggressive abrasive conditions may be present.

ARC T7 AR industrial coating is designed to:

Resist a wide range of inorganic, as well as organic, acids and hydrocarbon-based chemical compounds
Resist abrasion
Easily apply by trowel

Chemical resistant polymer matrix
Resists a broad spectrum of organic and inorganic acids
Resists high temperature immersion exposures
Incorporates high strength ceramic reinforcements
Permeation resistant
Abrasion resistant
Toughened resin structure
Resists cracking and disbondment under thermal cycling conditions
Resists rapid decompression

Nominal, based on 3 mm (120 mils) thickness

20.4 kg kit covers 2.5 m2 (27 ft2)

ARC T7 AR is recommended to be applied as a one coat system at minimum 3-4 mm
(120 – 160 mils) total dry film thickness

Kit also includes ARC T7 AR VC (veil coat) for final coat smoothing

Note: Components are pre-measured and pre-weighed.

Each kit includes application instructions and tools.

Maintain transport temperature below 24°C (75°F)

Available Colors

Red

Chemical resistant polymer matrix
Resists a broad spectrum of organic and inorganic acids
Resists high temperature immersion exposures
Incorporates high strength ceramic reinforcements
Permeation resistant
Abrasion resistant
Toughened resin structure
Resists cracking and disbondment under thermal cycling conditions
Resists rapid decompression

Nominal, based on 3 mm (120 mils) thickness

20.4 kg kit covers 2.5 m2 (27 ft2)

ARC T7 AR is recommended to be applied as a one coat system at minimum 3-4 mm
(120 – 160 mils) total dry film thickness

Kit also includes ARC T7 AR VC (veil coat) for final coat smoothing

Note: Components are pre-measured and pre-weighed.

Each kit includes application instructions and tools.

Maintain transport temperature below 24°C (75°F)

Available Colors

Red

PT. PANCAMAS PUTRAMANDIRI

Nominal, based on 3 mm (120 mils) thickness

Available Colors

Nominal, based on 3 mm (120 mils) thickness

Available Colors

Need more information?

About

Contact

Submission Form to Request Catalog For Product: